Pipe Fan Clamp Connectors

Pipe Fan Clamp Connectors

1.Product Introduction

Pipe Fan Clamp Connectors are a quick-fix method for connecting fans to ducts, reducing vibration transmission. Make the service and cleaning of fans much easier. Made from galvanized sheet steel and fitted with an 8mm neoprene lining. Clamped together by 2 screws which allow for small difference in dimension.

The purpose of Pipe Fan Clamp Connectors is to simplify the installation of fans and to isolate fan vibrations from rigid metal ducting. Pipe Fan Clamp Connectors are convenient for installations where it is necessary and easy to disassemble the fan for inspection and cleaning at regular intervals. 

2.Product Parameter (Specification)

PCC	D
100	100
125	125
150	150
160	160
200	200
250	250
315	315
355	355
400	400
450	450
500	500

3.Product feature And Application

Pipe Fan Clamp Connectors are stabilizing mounting clamps, can be used for suspension installation of fans, reducing vibration transmission.
Allows for easy servicing and cleaning of fans.
Made from galvanized sheet metal and fitted with a neoprene lining.
Clamped together with two screws allowing for small difference in dimensions.
Available in 11 sizes from 100mm to 500mm

Installation Instructions
A - To minimize vibration, leave a 1/4" gap between the fan collar and the duct.
B - Tighten the two screws until the fan and duct are held tightly connection.
C - If using Pipe Fan Clamp Connectors to support the fan, thread the two sheet metal screws through the clamps. The two sheet metal screws are passed through the clamps and into the collar of the fan. Do not tighten too much, the screws are to ensure the clips do not slip off the fan.
D - If the fan is to be suspended from the integral hanging tabs, follow steps 1 and 2 in the diagram.
Steps in the diagram